Are you looking to make your email marketing better and more affordable? One big factor is making sure your emails actually get to people’s inboxes. This is called “email deliverability.”
Emailpumper Account Setup | Launch your first Campaign with Emailpumper
What’s the Solution? Emailpumper.com. This tool lets you use your own SMTP server. This means you have more control over your emails and how much you spend.
Why is This Important? Think about sending many emails for very little money. Even better, these emails actually get read by people.
Why Emailpumper.com is better email marketing platform?
Setting up your own SMTP server is a smart move. This guide will show you how to do it, step by step. Let’s get going.
Understanding SMTP Server
If you’re new to email marketing, you might be wondering what an SMTP server is. Don’t worry; it’s simpler than it sounds.
What is SMTP?
SMTP stands for Simple Mail Transfer Protocol. Think of it like the post office for your emails. Just like the post office takes your letters and delivers them to the right homes, an SMTP server makes sure your emails get to the right inboxes.
Why is it Important?
An SMTP server is the heart of any email marketing platform. Without it, your emails won’t get sent. It’s that crucial.
What About Other Platforms?
You might have heard of popular email platforms like MailChimp or ActiveCampaign. They also use SMTP servers but often charge you a lot of money if you have many contacts.
So, an SMTP server is key to email marketing. It’s what sends your emails, and choosing the right one can save you money. In the next section, we’ll talk about how to pick the best SMTP server for you.
Choosing the Right SMTP Server
So, you know an SMTP server is important, but how do you pick the right one? Not all SMTP servers are good for sending many emails at once.
SMTP Servers to Avoid
Regular Email Providers: Gmail, G-suite, and Outlook are not good for sending bulk emails. They are made for everyday emails and have a limit on how many you can send. If you send too many, your account could get shut down.
Recommended SMTP Providers
Now, let’s talk about some good options for SMTP servers. These are known for letting you send many emails, having a good reputation, and being affordable.
Amazon SES: Costs only $5 to send 50,000 emails. You pay for each email, no monthly fees.
Elastic Email: Costs $15 for 50,000 emails. You pay a monthly fee.
SparkPost (MessageBird): Costs $20 for 50,000 emails. Also a monthly fee.
MailGun: Costs $35 for 50,000 emails. Monthly fee as well.
Other respectful mentions: SendGrid, PostMark, SMTP.com, SMTP2Go
You can also find more options by searching “SMTP server for bulk email marketing” on Google.
For this guide, we’ll use Amazon SES. It’s cheap and has a great reputation for making sure your emails get delivered. Next, we’ll show you how to set it up.
Setting Up Amazon SES in 3 Simple Steps
You’ve decided to go with Amazon SES, a smart choice for both cost and deliverability. Now, let’s set it up. It’s easier than you think and involves just three main steps.
Create an AWS Account
Visit AWS: Go to the AWS homepage and look for the “Sign Up” button.
Fill in Details: You’ll need to give some basic information and add a credit card for verification.
Confirm: Once you’ve filled everything in, you’ll get a confirmation. Now, your AWS account is ready.
Please see Video tutorial on how to setup Amazon SES with Email Pumper
Disclaimer: Make sure to use your best website while verifying your domain and later requesting production access. You can connect multiple domains to Amazon SES later. However, the first domain you connect to should be your best website. Please ensure your website has a privacy policy, terms of service, and a contact us page. It will help build trust and get easy and fast production access from the AWS team.
Log In: Open your new AWS account and find the SES (Simple Email Service) section.
Add Domain: Click on “Domain Identity” and follow the steps to add your website domain.
DNS Records: You’ll get some DNS records. Add these to your website’s DNS settings to prove you own the domain.
Please See Video tutorial on how to verify a domain identity in Amazon SES and also Requesting SES Production Access?
Go to SES Dashboard: Once you’re back in AWS, go to the SES section again.
Find ‘Account Dashboard’: Here, you’ll see a button or link that says “Request Production Access.”
Fill the Form: Click it and fill out the form that appears. This is your request to send emails to real people, not just test accounts.
Refer to this template message when requesting production access.
Disclaimer: Your first request for production access might get rejected instantly by a bot. All you need to do is take the same message and send it again. to the AWS SES team on the “Request Production Access” page.
Wait for 24 hours, come back to your SES dashboard and your Amazon SES account should get approved for sending 50,000 emails per day.
In rare cases, Amazon SES might ask you further questions for approval. Please reply to these questions in as much detail as possible. Your request might not get approved if you tell them you’re planning to send cold emails to a purchased email list.
Move Amazon SES out of Sandbox Zone | SES Production Access Request
Amazon SES Approval Template
I am seeking approval from Amazon SES to utilize the service for sending email newsletters to my subscribers, as well as for transaction receipts and other essential business communications.
About my business: {describe your business in 30 words}
My website is integrated with my email system, including lead magnets, and I am committed to adhering to all Amazon SES guidelines and best practices to ensure responsible and high-quality email communication.
Your approval will greatly assist in enhancing my subscriber engagement and overall business operations.
And that’s it for setting up Amazon SES! You’re now ready to connect it to Emailpumper.com, which we’ll cover next.
Connecting Amazon SES with Emailpumper.com
You’ve got your Amazon SES set up, and now it’s time to link it with Emailpumper.com. This is easier than you might think and comes with lots of benefits like low cost and high email deliverability. Here’s how to do it step by step:
Please See Video tutorial on how to Connect Amazon SES API with Emailpumper.com | SMTP Tutorial
Get Your AWS Details Ready
Log In to AWS: Open your AWS account and go to the IAM (Identity and Access Management) section.
Create a User: Click on ‘Users’ and then ‘Create User.’ Give this user a name, like “Emailpumper_user.”
Set Permissions: You’ll need to give this user some special permissions. These are:
Amazon SES Full Access
Amazon SNS Full Access
IAM Read Only Access
Save Your Keys: AWS will give you an Access Key ID and a Secret Access Key. Keep these safe; you’ll need them soon.
Set Up Emailpumper.com
Log In to Emailpumper.com: Open your Emailpumper.com account and sign in.
Find ‘Sending Server’: In the dashboard, look for a section called “Sending Server” and click on “New Server.”
Pick Amazon Web Service API: This is the option you want for your new server.
Put in AWS Details: Now, enter the Access Key ID and Secret Access Key you got from AWS.
Choose Your Region: You’ll also need to pick your AWS region. This will fill in the hostname for you.
Finish the Setup
Your Name and Email: In Emailpumper.com, you’ll need to enter your name and the email you’ll be sending from.
Pick Your Domains: You’ll see a list of domains that are linked to your SES account. Turn on the ones you want to use.
Click ‘Save’: Finally, click the ‘Save’ button to finish the setup.
And you’re done! Your Amazon SES is now connected to Emailpumper.com. This means you can send emails through Emailpumper.com, but they’ll actually be sent by Amazon SES. This gives you the best of both: easy use and low cost. Next, we’ll make sure your sending domain is verified in Emailpumper.com
Verifying Your Sending Domain in Emailpumper.com
You’ve connected Amazon SES with Emailpumper.com, but there’s one more step before you can start sending emails: verifying your sending domain. This is crucial for ensuring your emails get delivered properly and helps build trust with both email providers and your recipients. Here’s how to do it:
How to verify a sending domain in Emailpumper.com
Navigate to the Sending Tab
Log In to Emailpumper.com: Open your Emailpumper.com account and log in.
Go to Sending Tab: On the dashboard, you’ll see a tab labeled “Sending.” Click on it.
Find ‘Sending Domains’: This will take you to a new dashboard where you can add your sending domain.
Add Your Domain
Click on ‘+ New Sending Domain’: You’ll see this option on the new dashboard.
Enter Domain Name: Type in the domain name you want to use for sending emails.
Enable Signing: There’s an option for this; make sure it’s turned on.
Click ‘Save’: After this, you’ll get two DNS records.
Update DNS Records
Find Your DNS Zone Editor: This depends on who hosts your website. Search for “[Your Hosting Provider] DNS Zone Editor” to find it.
Add DNS Records: Copy the first DNS record from Emailpumper.com and paste it into your DNS Zone Editor as a TXT record. Do the same for the second DNS record.
Verify Your Domain
Wait a Bit: It can take 24 to 48 hours for these changes to take effect.
Go Back to Emailpumper.com: Once the time has passed, go back to the “Sending Domains” section.
Click ‘Verify Now’: You’ll see this next to your domain name. If everything worked, you’ll see a “Verified” status next to your domain.
And that’s it! Your sending domain is now verified in Emailpumper.com, which means you’re all set to send emails. This is a crucial step for making sure your emails actually get to where they’re supposed to go. Next, we’ll talk about how to set up a custom tracking domain in Emailpumper.com.
Setting Up a Custom Tracking Domain in Emailpumper.com
To truly optimize your email marketing, tracking is essential. Emailpumper.com allows you to set up a custom tracking domain, enhancing your email deliverability and providing detailed insights into email opens, clicks, and more. Here’s how to set it up:
How to Install Custom Tracking Domain in Emailpumper.com?
Choose DNS/CNAME Verification (Method 1)
Disclaimer: Please only select HTTP method, using HTTPs method will not work here.
Log In: Access your Emailpumper.com account and navigate to the ‘Sendings’ tab. Select ‘Tracking’s Domain.’
Add Domain: Click on ‘Add Domain’ and enter your subdomain (e.g., track.yourdomain.com). Make sure to only add a sub-domain, not your primary domain.
DNS Record: Copy the provided CNAME record from Emailpumper.com and create a new CNAME record in your domain provider’s DNS Zone Editor. Save the changes.
Verification: Return to Emailpumper.com, refresh the page, and your tracking domain should now display as ‘Verified.’
Setting up a custom tracking domain in Emailpumper.com is straightforward and offers you a reliable way to track your email campaigns.
Importing Your Contact List into Emailpumper.com
You’re almost there! Now that your domain is verified, it’s time to import your contact list. This is the list of people you’ll be sending your emails to. Here’s how to do it:
How to map imported CSV fields with Emailpumper Audience List?
Create a New List
Log In to Emailpumper.com: Open your Emailpumper.com account and sign in.
Click ‘Create List’: You’ll find this button on your dashboard.
Name and Save: Give your list a name and enter your email ID, then click ‘Save.’
Import Contacts
Find Your List: Go back to your dashboard and locate the list you just created.
Click ‘Import’: You’ll see an ‘Import’ button next to your list.
Upload CSV: Click ‘Start Import’ and choose the CSV file that has your contacts.
Map Fields
Auto-Mapping: After uploading, Emailpumper.com will try to auto-map some fields for you.
Manual Mapping: You can also manually map fields. For example, make sure the ‘Email,’ ‘First Name,’ and ‘Last Name’ columns in your CSV match the corresponding fields in Emailpumper.com.
Custom Fields (Optional)
Go to ‘Manage List Field’: If your CSV has extra columns like ‘Company Name,’ you can create custom fields here.
Create and Save: Make a new field, name it, and save it.
Finalize Mapping
Double-Check: Make sure all fields are mapped correctly.
Start Import: Click ‘Okay, I’m done,’ then ‘Start Import.’
Review
Go to ‘View All’: This is in your list section.
Check Contacts: Make sure all contacts are imported correctly.
And that’s it! Your contact list is now in Emailpumper.com, and you’re all set to start sending out those emails. Properly mapping your fields ensures that your emails are personalized and reach the right people. Ready for the next step?
Launching Your Email Campaign in Emailpumper.com
You’ve verified your domain and imported your contact list. Now comes the exciting part: launching your email campaign. This is where you’ll see the fruits of your labor. Here’s how to create a successful email campaign in Emailpumper.com:
How to Create a Regular Email Campaign in Emailpumper.com
Access the Campaign Interface
Log In to Emailpumper.com: Open your Emailpumper.com account and sign in.
Navigate to ‘Campaigns’: On the dashboard, click on the ‘Campaigns’ section.
Review Past Campaigns: Before creating a new one, you can check the analytics of your previous campaigns like open rates, click-through rates, and more.
Create a New Campaign
Click ‘Create Campaign’: You’ll see this option in the ‘Campaigns’ section.
Choose Template Type: Pick between a ‘Regular HTML template’ or ‘Plain Text’. For this guide, we’ll use the ‘Regular HTML template.’
Set Campaign Details: Name your campaign, add a subject line, specify the ‘From’ name and email, and set your reply-to email.
Design Your Email
Upload or Create Template: You can either upload an existing HTML template or create a new one.
Use Drag-and-Drop Builder: If creating a new template, use the drag-and-drop builder to design your email.
Personalize with Liquid Tags: To address each subscriber by their first name, you can use Liquid tags.
Schedule Your Campaign
Immediate or Later: Decide if you want to send your campaign immediately or schedule it for later.
Add Attachments: If needed, you can add attachments to your emails.
Review and Send: Before sending, you’ll see a summary of your campaign details. Click ‘Send’ to launch your campaign.
Monitor Performance
Real-Time Monitoring: Once your campaign is live, you can monitor its performance in real-time.
View Detailed Stats: Understand how your audience is engaging with your emails.
And there you have it! You’ve successfully created and launched an email campaign using Emailpumper.com. This is the final step in your journey to effective email marketing. Now, all that’s left is to monitor your campaign and tweak it for even better performance.
